Plywood/glass tank question

Discussion about tank equipment (lights, heaters, etc.) & books. Also DIY projects.

Moderator: Ken Boorman

Post Reply
Posts: 3
Joined: Wed Sep 01, 2010 5:12 pm

Plywood/glass tank question

Post by joker1535 » Mon Sep 05, 2011 3:26 pm

I am building a plywood tank 96 long 24 wide and 18 high. I know lots of guys are coating it with epoxy, but I got another idea.
Is it possible to put thinner glass on the back and sides against the plywood and just 1/2 glass at the front???
Anybody ever do that?
All opinions are appreciated. Thanks

Dan Woodland
CichlidRoom Expert
Posts: 3049
Joined: Wed Mar 01, 2006 9:49 am

Re: Plywood/glass tank question

Post by Dan Woodland » Mon Sep 05, 2011 4:22 pm

Safety should be your main concern, here is a calculator or two...

Dan ... ulator.htm

Post Reply

Return to “Equipment, Supplies, Books and DIY”