Page 1 of 1

Plywood/glass tank question

Posted: Mon Sep 05, 2011 3:26 pm
by joker1535
I am building a plywood tank 96 long 24 wide and 18 high. I know lots of guys are coating it with epoxy, but I got another idea.
Is it possible to put thinner glass on the back and sides against the plywood and just 1/2 glass at the front???
Anybody ever do that?
All opinions are appreciated. Thanks

Re: Plywood/glass tank question

Posted: Mon Sep 05, 2011 4:22 pm
by Dan Woodland
Safety should be your main concern, here is a calculator or two...

Dan
http://www.theaquatools.com/building-your-aquarium

http://saltaquarium.about.com/od/planas ... ulator.htm